Fireplace gloves are made to keep your hands safe while working with fire. They’re typically built of leather or cotton, with a thick wool lining in the palm area. When near a fireplace, stove, or any other heating source that might cause skin burns, fireplace gloves must be worn.
Excessive heat resistance allows you to be safe at temperatures up to 930 degrees Fahrenheit when wearing fireplace gloves. Finally, the gloves are 16 inches long to provide your hands and forearms with some support.
Wearing Fireplace gloves appropriately is one of the most critical components of using them. Fireplace gloves are intended to prevent your hands from being burned by a fireplace. However, they can still be burned if placed incorrectly.
Contents
- Best Gloves for Handling Firewood
- What To Look For In A Pair Of Fireplace Gloves?
- How Do Fireplace Gloves Work?
- Buying Guide for the Best Gloves for Handling Firewood
- Importance of Gloves When Handling Firewood
- Overview of the Benefits of Wearing Gloves
- Safety Precautions
- Protection from Injuries
- Importance of Wearing Gloves for Safety
- Types of Gloves for Handling Firewood
- Maintaining and Storing Gloves
- How to Extend the Lifespan of Gloves
- Conclusion
Best Gloves for Handling Firewood
1. WZQH 932F Leather Forge Gloves

The aluminum mid-layer gives these gloves a huge advantage over many of their competitors. This mid-layer is extremely fire-resistant, providing an extra layer of security for the user’s hands.
Cowhide split leather is used on the exterior, which is fairly normal for heat-resistant gloves, and a soft cotton liner is used on the inside to keep the hands comfy. For increased palm protection, there is a stronger leather palm. Kevlar stitching holds all of these layers intact. Overall, the three-layer fabrication is good since it provides more protection.
The sizing is one-size-fits-all, which has its advantages and disadvantages. It may be appropriate for all of the adults in the household, but it is unlikely that the children will utilize it. People with tiny hands may wish to purchase many pairs in order to select the appropriate size in the shopping basket.
The 7.5-inch sleeve is about as long as required for wrist and forearm protection, but it won’t run up too high to be bothersome. Finally, the hanging hook makes it simple to put them near a fireplace, ready to use the next time, making it one of the Best Gloves for Handling Firewood.
Pros
- Cotton Inside
- Sweat absorbent
- Breathable
- Allergy fee
- Heat insulation
Cons
- N/A
2. Caiman Deerskin Welding Glove

Caiman is a well-known name in the world of fire-resistant gloves. Caiman is distinguished by its ‘Kontour’ design. It’s a design element that increases dexterity for grasping and more delicate hand movements.
Because its stitching and strengthened leather portions are curved, they don’t obstruct mobility as much as other manufacturers. However, you’re still wearing heavy leather gloves, so don’t anticipate anything supernatural.
The gloves are made of deerskin, which is less rigid and less lasting than cowhide, making it one of the Best Gloves for Handling Firewood. Another feature of these gloves is the extremely long cuff, which reduces the danger of arm burns. This cuff comes close to reaching the elbows. From tip to tip, the glove measures 21 inches.
While this is convenient, if wearing thick long sleeves, it might be difficult to pull them on and off. Finally, because of the well-known brand name, the price is slightly more.
Pros
- Comfortable
- Protects up to the elbow
- Breathable
- Great Quality
Cons
- Slightly Thick
3. Kum Yuan Extreme Heat & Fire Resistant Gloves

You have the option of selecting your size. There are three sizes available, as well as plush inside lining for added comfort. Nonetheless, because they are made of robust but rigid side-split cowhide leather, we consider them to be stiff.
Kevlar stitching holds that leather together. An additional layer of leather is added to the palm to assist protect the most sensitive region of the hand when dealing with heat. Another feature we like about these gloves is the 90-day no-questions-asked return policy. It gives us a lot more faith in our decision.
Pros
- Durable Gun Cut
- High Strength Sewing
- Trick and Soft
Cons
- The leather is rigid
4. Ironclad Welding Leather Gloves

Unlike the other gloves mentioned here, these don’t contain an aluminum layer. They do, however, feature a fantastic foam insulating layer, making them one of the Best Gloves for Handling Firewood. The variety of sizes available is the nicest feature of these gloves.
When shopping online, Ironclad offers a wonderful sizing chart to guarantee you obtain the appropriate fit. These gloves are made of Elkskin, not cowhide, which is often softer and more dexterous.
They do, however, include cowhide leather on the palm for reinforcement where it’s needed the most. As a result, we anticipate that these gloves will provide some protection, particularly due to the foam insulation layer, but not as much as full-thickness cowhide leather gloves.
Additionally, there is a rather lengthy forearm sleeve for protection, which may be useful when dealing with crackling and spattering flames. Finally, we appreciate the fact that Ironclad gloves are typically reasonably priced.
Pros
- Has foam insulation layer
- Long sleeves
- Cowhide reinforced patch
- Perfect for welding
Cons
- N/A
5. Drake Off Road Tools 400 Welding Gloves

Despite the fact that these gloves are labeled “US Forge,” the product does not appear to be created in the United States. From a consumer’s standpoint, it’s a little deceiving. But, other than that one issue, the gloves are a terrific, low-cost option for gloves you wish to buy, use, and discard.
Because they’re constructed of real cowhide leather, they’re prone to be stiff. Unfortunately, this implies that these gloves will be less comfortable than equivalents made of elk or goat leather.
Since these gloves are one size fits all and have a shorter cuff, people would be wary of sparks if they were near a fire. Overall, one classifies these as a pair of disposable gloves because they’re not outrageously priced.
Pros
- Affordable
- Comfortable to use
- Durable
- Good quality
Cons
- Not for welding
6. SHOWA Atlas Palm Coating Rubber Glove

This Palm Coating Natural Rubber Glove has a great wet and dry grip. It guards against abrasion, cutting, puncturing, and ripping. It has a high-warmth smooth cotton thermal lining for insulation. It is designed in an ergonomic manner.
Its rough-textured grip gives for a solid grasp on slick things. It’s available in two colours: light grey and grey palm. The palms of these knit cold-weather insulated gloves are coated with latex. When handling dry, light components, the natural-rubber latex covering is supple and elastic across a wide temperature range, ensuring a secure fit and a comfortable grip.
Water, alcohols, and certain ketones are resistant to it, but hydrocarbons and organic solvents are not. Knit cold-weather gloves are coated to keep hands warm when handling cold objects or working in cold situations. Seamless knit gloves decrease weight and increase comfort by being created from a single piece of cloth with no seams.
Pros
- Rough Grip
- Abrasion Resistant
- Palm Coated
- Insulated
- Breathable
Cons
- Not for welding
7. SHOWA Atlas Coating Natural Rubber Glove

This multi-purpose and one of the Best Gloves for Handling Firewood is ergonomically engineered to increase performance and comfort across a number of activities and is acclaimed for its comfort and situational grip. Its breezy open-back design keeps you cool, and the elasticated wrist minimizes dirt from getting into the glove.
A natural rubber palm covering with a rough texture ensures optimal grip and agility. This natural rubber palm-coated 10-gauge knit is ergonomically engineered to be the best fit for any and all general-purpose applications, thanks to its comfort-conscious construction and tactical grip performance.
It has a strong grip and a form-fitting design. It is permeable. Increased dexterity is included. Seamless knit is used. This glove works well in agriculture, construction, landscaping, packaging, and even DIY.
Pros
- Rough Grip
- Ergonomic
- Lightweight
- Palm Coated
- Breathable
Cons
- It is not reversible
What To Look For In A Pair Of Fireplace Gloves?
Leather Exterior
When it comes to fire and heat-resistant gloves, the leather exterior is generally the first thing we check for. Cowhide leather, deerskin, or goatskin are all options. Cowhide leather is firm but inflexible, deerskin is more flexible but thinner, and goatskin is also more flexible but thinner.
Kevlar Stitching
Kevlar stitching is seen on the majority of good fire and heat-resistant gloves. Because Kevlar is so good at resisting heat and fire, it can withstand the elements better than ordinary sutures. As a result, make sure you obtain a pair with Kevlar stitching.
Palm Protection
The palm of the hand is acutely sensitive, especially when handling the heat. As a result, palm protection is an important feature to look for in a pair of gloves. More padding in susceptible areas is preferable.
Choices in Size
The majority of gloves in this category are one-size-fits-all. While the fit isn’t ideal, it appears to be industry standard. There are several solutions for persons with extremely small or large hands, such as the Ironclad gloves, where you may choose your size.
How Do Fireplace Gloves Work?
Fireplace Gloves are specifically made gloves that shield the wearer from the heat generated by fires. Insulation, waterproofing, and a reflective metal coating are common components of fireplace gloves for added safety and comfort.
The lining of the Fire Glove is constructed of a water-resistant insulating fabric that keeps hands dry even when they’re heated!
Fireplace gloves can also be used in the same manner that oven mitts are used. They keep your hand from being burned when it comes into contact with something excessively hot or cold, but that’s just half of what makes them so effective.
Buying Guide for the Best Gloves for Handling Firewood
When it comes to handling firewood, it’s important to keep your hands protected from sharp edges, splinters, and burns. That’s why investing in a good pair of gloves specifically designed for this purpose is essential. Here’s a step-by-step guide to help you choose the best gloves for handling firewood.
Step 1: Determine the Type of Firewood You’ll Be Handling
Different types of firewood can have varying levels of sharp edges and splinters. Softwoods like pine may not be as abrasive as hardwoods like oak or maple. Knowing the type of firewood you’ll be handling can help you select gloves that are appropriate for the job.
Step 2: Consider the Materials
Gloves for handling firewood are typically made of leather, canvas, or a combination of both. Leather gloves provide better protection against heat and abrasions, while canvas gloves are more breathable and flexible. Some gloves also feature reinforced fingertips or palms for added durability.
Step 3: Choose the Right Size
The right size is important for ensuring that the gloves fit snugly and provide maximum protection. It’s essential to measure the circumference of your hand at the widest point and compare it to the size chart provided by the manufacturer. If you’re in between sizes, it’s usually best to choose the larger size.
Step 4: Look for a Good Grip
A good grip is crucial when handling firewood, as it helps prevent slips and drops. Some gloves feature textured palms or fingers for a better grip, while others may have silicone or rubber coatings. Make sure to choose gloves that provide a secure grip without sacrificing comfort.
Step 5: Check for Heat Resistance
When handling firewood, it’s important to protect your hands from heat. Look for gloves that are heat resistant and can withstand high temperatures. Some gloves are made with materials like Kevlar or Nomex, which are known for their excellent heat resistance.
Step 6: Consider Comfort and Mobility
It’s important to choose gloves that are comfortable to wear and allow for easy movement. Look for gloves that have a comfortable lining and are not too stiff. Some gloves may also have a flexible design that allows for greater dexterity.
Step 7: Read Reviews and Compare Prices
Before making a final decision, it’s a good idea to read reviews from other customers who have purchased and used the gloves you’re considering. This can give you valuable insights into their performance and durability. Additionally, compare prices to ensure that you’re getting the best value for your money.
In conclusion, when it comes to choosing the best gloves for handling firewood, it’s important to consider the type of firewood you’ll be handling, the materials, size, grip, heat resistance, comfort, and mobility. By following these steps and taking the time to research your options, you’ll be able to find the perfect gloves for your needs.
Importance of Gloves When Handling Firewood
One of the safety precautions to take when handling firewood is wearing gloves. Gloves protect your hands from the roughness and sharp edges of the wood, as well as splinters, thorns, and other debris that may be present. Additionally, gloves provide a layer of insulation to keep your hands warm and dry.
Overview of the Benefits of Wearing Gloves
The benefits of wearing gloves when handling firewood are numerous. They include:
Protection from injuries: Gloves protect your hands from cuts, splinters, thorns, and other sharp objects that may be present in the firewood.
Improved grip: Gloves provide a better grip on the wood, making it easier and safer to handle.
Insulation: Gloves provide a layer of insulation to keep your hands warm and dry while handling cold and wet wood.
Comfort: Wearing gloves makes handling firewood more comfortable and less strenuous, reducing the risk of fatigue and strain.
Safety Precautions
Safety Hazards of Handling Firewood
Handling firewood can be dangerous if proper safety precautions are not taken. Some of the safety hazards associated with handling firewood include:
Cuts and punctures: Firewood can have sharp edges, splinters, and thorns that can cause cuts and punctures.
Burns: Wood can be hot, and touching it with bare hands can cause burns.
Back injuries: Lifting heavy logs can cause back injuries if not done properly.
Protection from Injuries
To protect yourself from injuries when handling firewood, it’s essential to wear gloves. Gloves provide a layer of protection for your hands, preventing cuts, punctures, and burns. Additionally, gloves provide a better grip on the wood, reducing the risk of dropping heavy logs on your feet or toes.
Importance of Wearing Gloves for Safety
Wearing gloves is crucial for safety when handling firewood. Without gloves, you risk injuring your hands, which can affect your ability to work and perform daily activities. Additionally, wearing gloves reduces the risk of accidents and injuries, making handling firewood a safer and more enjoyable experience.
Types of Gloves for Handling Firewood
There are several types of gloves you can wear when handling firewood. The type of glove you choose will depend on your specific needs and preferences. Here are some of the most common types of gloves for handling firewood:
Leather Gloves
Leather gloves are a popular choice for handling firewood. They are durable, offer excellent protection, and provide a good grip. Leather gloves come in various sizes and styles and are suitable for handling both small and large logs.
Heat-Resistant Gloves
Heat-resistant gloves are designed to protect your hands from high temperatures. These gloves are ideal for handling hot and burning wood and are often used by professionals. Heat-resistant gloves are typically made from materials such as Kevlar and Nomex, which can withstand high temperatures.
Cut-Resistant Gloves
Cut-resistant gloves are designed to protect your hands from cuts and punctures. These gloves are made from materials such as Kevlar and steel mesh and are ideal for handling wood with sharp edges and thorns.
Waterproof Gloves
Waterproof gloves are designed to keep your hands dry and warm when handling wet firewood. These gloves are typically made from materials such as neoprene and rubber and are ideal for handling wood in wet or snowy conditions.
Maintaining and Storing Gloves
To ensure your gloves last longer and provide adequate protection, it’s essential to maintain and store them properly. Here are some tips for maintaining and storing your gloves:
Cleaning Gloves
Gloves should be cleaned regularly to remove dirt, debris, and sweat. Leather gloves can be cleaned with a damp cloth, while other materials such as neoprene and rubber can be washed with soap and water. Avoid using hot water or bleach, as this can damage the gloves.
Proper Storage
Gloves should be stored in a cool, dry place away from direct sunlight. Avoid storing gloves in damp or humid areas, as this can cause mold and mildew to grow. You can store gloves in a drawer or on a hook, but make sure they are not in contact with any sharp objects that can damage them.
How to Extend the Lifespan of Gloves
To extend the lifespan of your gloves, it’s essential to take care of them properly. Here are some tips for extending the lifespan of your gloves:
- Avoid exposing gloves to extreme temperatures or harsh chemicals.
- Store gloves in a cool, dry place away from direct sunlight.
- Clean gloves regularly to remove dirt and sweat.
- Avoid overstretching or pulling the gloves too hard.
- Replace gloves when they become worn or damaged.
Conclusion
If you examine all of these factors, you’ll be able to choose a pair of heat-resistant gloves that will not only shield you but also make using them much simpler.
Heat-resistant gloves will help you feel more comfortable near your fireplace or when trying out new welding skills. The features of leather, kevlar, aluminum and cotton are commonly combined in these harder gloves to ensure that your hands are guarded and comfortable.